Metalbestos 7S-CSP Ceiling Support Package All Fuel

Metalbestos 7S-CSP. Save big $$ 30.00+ on support packages for SS and UT Types Metalbestos All Fuel Chimneys. We have these support packages left over from the UltraTemp Chimney changeover. They are interchangeable and will not affect the UL Listing of the UT All Fuel Chimney. Features Include: 1 Support Package for 7T All Fuel chimney Supports 85ft of Chimney Framing:11-1/4 x 11-1/4 inches Shipping Wt.: 5Lbs Finish: Galvanized Steel New in Original Packaging

Metalbestos RV Gas Vent Tees 7 (Qty Of 4)

Metalbestos 7RV-TS Tees. Quantity of 4. Save big $$ on 4 RV Gas Vent Tees. We have these in excess on a job that wasn't completed. May be used on other Manufactures' RV Gas Vent with Mfg. supplied adapters. They are interchangeable with adapter and will not affect the UL Listing of the RV All Fuel Gas Vent Includes: 4 7 RV Tees, by Metalbestos Measures: 11-1/2" high Shipping Wt.: 14Lbs Finish: Galvanized Steel New in Original Packaging

Metalbesos SBS Segmented Trim Collar 3pcs.

Selkirk has discontiued the segmented trim collar which is used to trim hole openings in flat or pitched ceilings. 3 Pieces are provided which is enough to provide a collar for 8" All Fuel or 10" RV Gas Vent up to 6/12 pitched ceilings. They could have other uses and can be shaped for a irregular forms or sq ducts. Could be used to trim single wall air ducting.

Metalbestos Full Protection Chimney Cap, Stainless Steel

Metalbestos Full Protection Chimney Cap for "Chimney Housing Packages" or Masonary chimneys up to 12x12".

Magic Heat, Flue Gas Heat Reclaimer, Reverse Crimp

MH Series Magic Heat Wood Burning Heat Reclaimer Reverse Crimp

Reclaims the wasted heat presently being lost up the chimney Designed for use with all types of heating equipment with inside flue temperatures exceeding 350º, skin temperatures of 250º Installs easily - attaches directly to the flue of your present heating equipment with basic household tools Thermostatically-controlled; factory preset to provide trouble-free operation. Plugs into any standard 110V home outlet One year limited warranty 6", 7" and 8" available Approved and recommended for Air-Tight Heaters SAVE MONEY SAVE HEAT WITH A TRUE HEAT RECLAIMER!

Exhaust heat and gases travel upward through the flue, circulating around the heat exchanger tubes. The pre-set thermostat automatically turns the blower fan on and off when the desired temperatures are reached, forcing the warmed air through the tubes and into the room. The waste exhaust gases continue up the chimney.

Specifications: Satin black heat-resistant finish 18¼" high; 10 3/8" wide; 14¼ deep Thermostatically controlled: Turns on at 150º and OFF at 110º BTU output variable: Minimum: 8,000/Maximum: 30,000 Fan: 8" diameter (produces 225 CFM) Motor: 120V/60Hz AC (1500rpm) UL and CSA Listed for continuous duty Electrical parts UL and CSA Listed Boxed weight: approximately 30 lbs

Heat Reclaimer, Magic Heat 6, 7, 8 Regular Crimp

MH Series Magic Heat Coal and Oil Fuels Heat Reclaimer Standard Crimp

Reclaims the wasted heat presently being lost up the chimney Designed for use with all types of heating equipment with inside flue temperatures exceeding 350º, skin temperatures of 250º Installs easily - attaches directly to the flue of your present heating equipment with basic household tools Thermostatically-controlled; factory preset to provide trouble-free operation. Plugs into any standard 110V home outlet One year limited warranty 6", 7" and 8" available Approved and recommended for Air-Tight Heaters SAVE MONEY SAVE HEAT WITH A TRUE HEAT RECLAIMER!

Exhaust heat and gases travel upward through the flue, circulating around the heat exchanger tubes. The pre-set thermostat automatically turns the blower fan on and off when the desired temperatures are reached, forcing the warmed air through the tubes and into the room. The waste exhaust gases continue up the chimney.

Specifications: Satin black heat-resistant finish 18¼" high; 10 3/8" wide; 14¼ deep Thermostatically controlled: Turns on at 150º and OFF at 110º BTU output variable: Minimum: 8,000/Maximum: 30,000 Fan: 8" diameter (produces 225 CFM) Motor: 120V/60Hz AC (1500rpm) UL and CSA Listed for continuous duty Electrical parts UL and CSA Listed Boxed weight: approximately 30 lbs

Z-Flex AL-29 3 x 120 inch Lenghts

Z-Vent Pipe Part Number: SVEPWC0310
3" dia. by 120" lenghts.
Features and Benefits: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved.
Shipping Notes: Because this item is oversized separate freight conditions apply. Please call 800-525-2228 for freight costs.

Z-Flex AL-29 3 x 96 inch Lenghts

Z-Vent Pipe Part Number: SVEPWC0308
3" dia. by 96" lenghts.
Features and Benefits: Z-Vent is a factory built, engineered AL29-4C special gas vent pipe, suitable for positive or negative pressure. Z-Vent is UL tested and listed to UL1738/S636. CAT II, III, IV venting approved.
Shipping Notes: Because this item is oversized separate freight conditions apply. Please call 800-525-2228 for freight costs.

Revolving Hazel Chimney Top
6 inch, Always Downwind

Artis 16 Globe Vent or Roof Ventilator, Galvanized

Artis16 " Globe Vent or Roof Ventilator Benefits Low silhouette gravity vent Positive draft assures good air flow. Weather tight construction Quality constructed in galvanized steel Drawbolt collar for size adjustment and secure fit Uses Commercial Roof Vent, Industrial Roof Vent Residential Roof Vent Attic Ventiliaton Roof Exhaust Appliance Exhaust SPECIFICATIONS: Dimensions: Overall 25" DIA. x 15" Hi Because of its size it Ships as 56 lbs Dimensional Weight Actual Weight: 7 lbs.